Replacement of voltage regulator and alternatorbrushes
| Replacement of voltage regulator and alternator brushes |
| 1. |
Undo the three bolts to remove the
alternator's protective cover.
Life off the cover.
|
|
| 2. |
Undo the two screws to remove the voltage regulator.
Lift out the voltage regulator. It is clipped in place. |
|
The alternator brushes are fitted in the voltage regulator and it is necessary to replace the entire unit.
Fit in reverse order.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
