SAAB WIS ONLINE

Checking the CRUISE lamp

Checking the CRUISE lamp



1. Check that 12 V is present across pin 8 (H) of the Cruise Control connector and a good ground when the Cruise Control system is activated.

2. If the voltage is OK, check the wiring for continuity or a short circuit by measuring the resistance across pin 8 (H) of the Cruise Control connector and pin 50 of main instrument display 2 or pin 2 of main instrument display 1.



If the resistance is < 1 ohm, check the bulb.

If the resistance is > 1 ohm, check the wiring and rectify the fault.