Checking the pushbuttons
| Checking the pushbuttons |
| Checking operation |
| 1. |
Connect the Scan Tool and
select the "READ VALUES" menu and then "PUSHBUTTONS".
|
|
| 2. |
Press the buttons one by one and check that the corresponding Scan Tool
display texts go from "OFF" to "ON" (keep each button depressed for a few seconds).
|
|
| 3. |
If any of the buttons does not work properly, continue fault diagnosis as
described on page
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
