Replacement of brake light switch
| Replacement of brake light switch |
The switch should be adjusted so that the brake lights come on when the pedal is depressed about 10 mm.
| 1. |
Remove the lower part of the
instrument panel on the driver's side.
|
|
| 2. |
Turn the brake light switch in either direction and lift it out.
|
|
| 3. |
Unplug the connector. Fit in reverse order.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
