Replacement of high-level brake light
| Replacement of high-level brake light |
| 1. |
Remove the tailgate trim.
|
|
| 2. |
Undo the two nuts.
|
|
| 3. |
Unplug the connectors.
|
|
| 4. |
Press out the lamp unit.
Fit in reverse order. Replacement of bulbs |
|
| 5. |
Remove the tailgate trim.
|
|
| 6. |
Turn the four bulb holders 90° and remove them.
|
|
| 7. |
Change the bulbs and fit in reverse order.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
