Reversing lights

/ 900 / 1995 / 3. Electrical system / Lighting and signalling system / Fault diagnosis on basis of fault symptoms / Reversing lights

The reversing lights are switched on when reverse gear is engaged and the ignition switch is in the Drive position.

1.	Check that fuses 9 and 31 are intact and supplied with current.

2.	Check that current is present on the connections of the reversing lights switch.

3.	Check that the light bulbs are OK and supplied with current.

4.	Check the connectors, wiring harness and ground connections.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.