SAAB WIS ONLINE

Replacement of lamp bulbs and conductivefoil

Replacement of lamp bulbs and conductive foil

Replacement of lamp bulb



1. Turn the bulb socket and lift out the bulb.


Replacement of conductive foil


1. Remove all the bulb sockets and be careful to make a note of where the GREY one was fitted.

2. Remove the 3 steel screws and the 7 brass screws.

3. Carefully lift off the conductive foil.


To fit



1. Fit the conductive foil carefully onto the rear unit and fit the bulbs back in their right places. NOTE: Make sure that the screws are fitted in the correct places. Take care to fit the GREY bulb socket in its correct place.