Odometer display lighting (MIU 2)
|
Odometer display lighting (MIU 2)
|
The light control does not work.
The odometer display lighting does not work.
1.
|
Connect a Scan Tool and select
"TEST FUNCTIONS" followed by "INSTR LIGHTG TEST". If in proper working order, the
brightness of the display lighting bulbs will change from 0 to maximum and then back to 0.
|
2.
|
If any bulb does not light up it is probably faulty and must be changed.
If none of the bulbs lights up in spite of them all being OK, check that the display
unit's leads which are connected to the connector marked CN4 on the intermediate
part's circuit board have not worked loose.
If the leads are OK, the fault is in the processor card. Continue on
.
|