Checking the starter motor when it is inoperation
| Checking the starter motor when it is in operation |
| Voltage at the battery |
| 1. |
Connect a voltmeter across the
battery terminals.
|
|
| 2. |
Start the engine and read off the instrument. A reading of at least 10 V should be
obtained.
|
|
| 3. |
If the voltmeter shows less than 10 V the battery must be recharged.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
