Alarm signal, country-specific/ownalternative/siren
Alarm signal, country-specific/own alternative/siren |
The theft alarm is pre-programmed for the requirements of 4 different countries on how an alarm is given. The operation thus fulfills the laws and insurance requirements that apply in these countries. For countries with other requirements, and for different customer requirements, individual programming is available under "OWN ALTERNATIVE" in the menu.
PROGRAMMING |
Country-specific
1. |
Connect the ISAT scan
tool.
Select "PROGRAMMING" |
2. |
Select "COUNTRY CODE".
|
3. |
Select the country. The table on the right shows the values for the different
countries. For "OWN ALTERNATIVE" or "SIREN", see the description below.
|
Country
|
Sound
time
|
Flash time
|
Germany
|
30 sec(*
|
5 min
|
Great Britain
|
30 sec(*
|
does not flash
|
Switzerland
|
30 sec(**
|
does not flash
|
OWN ALTERNATIVE
|
|
|
Holland
|
30 sec(**
|
5 min
|
Siren
|
|
|
*) Sound repeated at intervals.
**) Sound repeated continuously.
Own alternative
1. |
Select "COUNTRY
CODE".
Select "OWN ALTERNATIVE". |
2. |
Select the desired value for the alarm signal (sound and/ or flash) according
to the table below.
Sound time: 0-30-60-90-120-180-240-300 sec Sound frequency: 0-0.5-1-2 signals/sec Flash time: 0-60-120-180-240-300 sec Flash frequency: 0-0.5-1-2-4 signals/sec |
Siren
If a siren with battery back-up is fitted, this must be selected in the country code menu. The "SIREN" command, last in the programming menu is also selected "ON".Continue on .
Important | ||
The alarm horn must be disconnected when a siren with battery back-up is fitted. |
||