Antenna for remote control
|
|
Antenna for remote control
|
|
1.
|
First
detach the negative lead (-) from the car battery.
|
|
2.
|
Remove the control module as previous instructions.
|
|
3.
|
Unplug the connectors to the control module.
|
|
4.
|
Pull out the leads with pins (2) in the antenna connector.
|
|
5.
|
Undo the binding around the cable assembly. Pull apart the cable assembly (to
gain access to the antenna leads) and remove the antenna.
|
Important
|
|
Remember that the new antenna is installed in the same way as the old one.
|
|
|
|
