Electronic control module,SE/US/CA
| Electronic control module, SE/US/CA |
| 1. |
First
detach the negative lead (-) from the car battery.
|
|
| 2. |
Lift the left-hand front seat to its uppermost position.
|
|
| 3. |
Remove the scuff plate.
|
|
| 4. |
Lift the carpet just in front of the B pillar to gain access to the control
module.
3-D : Remove the seat-belt bolt located on the floor. |
|
| 5. |
Remove the two plastic nuts securing the control module and lift it
out.
|
|
| 6. |
Unplug the connector to the electronic control module.
|
|
| 7. |
Fit in reverse order
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
