Fitting kit, electronic control module,EU
|
Fitting kit, electronic control module,
EU
|
1.
|
Before
starting work, the negative (-) lead must first be disconnected from the battery.
|
2.
|
Remove the left-hand front seat.
|
3.
|
Remove the scuff plate.
|
4.
|
Lift up the carpet just in front of the B pillar in order to gain access to the theft
alarm connector.
3-D
: Remove the seat-belt bolt located on the floor.
|
5.
|
Plug in the control module to the 25 pin connector.
|
6.
|
Place the bottom part of the casing in position. Lay in the control module.
|
7.
|
Secure the control module with the two plastic nuts.
|
8.
|
Fit the lid of the casing with 4 bolts or pop rivets.
|