Fitting kit, electronic control module,SE/US/CA
|
Fitting kit, electronic control module,
SE/US/CA
|
1.
|
Before
starting work, the negative lead must first be disconnected from the battery.
|
2.
|
Lift the left-hand front seat to its uppermost position.
|
3.
|
Remove the scuff plate.
|
4.
|
Lift up the carpet just in front of the B pillar in order to gain access to the theft
alarm connector.
3-D
: Remove the seat-belt bolt located on the floor.
|
5.
|
Plug in the control module to the 25 pin connector.
|
6.
|
Tighten the control module by means of the two plastic nuts. Continue with point
9 on
.
|