Fitting kit, horn
| Fitting kit, horn |
| 1. |
Raise the car and remove the
front left-hand wheel. Remove the rear part of the wing liner and the plastic clip that holds
upper part of the wing liner in the wheel housing.
|
|
| 2. |
Find two 1 pin connectors in the wheel housing. Plug in the connectors to the
horn.
|
|
| 3. |
Bolt down the horn with nut and washer.
|
|
| 4. |
Refit the wing liner and the left-hand front wheel and lower the
car.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
