Fitting kit, LED
| Fitting kit, LED |
| 1. |
In the middle, above the facia is
a cover plate where the LED should be located. Press the cover plate backwards and
upwards to remove it.
|
|
| 2. |
Expose the connector which is taped on the metal plate under the cover plate
and connect the LED.
|
|
| 3. |
Fit the LED in the cover plate provided.
|
|
| 4. |
Fit the cover plate with the LED in the facia.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
