Remote control: flash/soundconfirmation
|
|
Remote control: flash/sound
confirmation
|
When arming/disarming/unlocking the tailgate using the remote control,
a flash/sound confirmation can be received. These are programmable and can be
limitedly selected. The following is the case at delivery:
|
•
|
if the
LH
button
is pressed to arm the car, the car's direction indicators will flash once
for 0.5 seconds. If the LH button is used for unlocking/disarming, this is indicated by the
car's direction indicators flashing 3 times. If the car alarm has been set off, this is
shown by 5 flashes when disarming.
|
|
•
|
if the
RH button
is pressed to unlock the tailgate,
this is not indicated. It is however possible to program a flash/sound confirmation for this
function.
|
LH button
Connect the scan tool.
Select "PROGRAMMING"
Select "FLASH/SOUND" and then:
|
1.
|
"ORIGINAL VALUE" to select
programming as at delivery from factory (see above). It is also possible to select sound
confirmation for the 3 functions.
|
|
2.
|
"ADJUSTING" to select programming other than the factory selection.
|
