SAAB WIS ONLINE

Remote control, rubber button as spare part

SERVICE INFORMATION
Bulletin Nbr: 383-1908 ed. 2
Date: ........... May 1998
Market: excl. US, CA
Remote control, rubber button as spare part


Cars affected

Saab 900 M95-, with remote controlled anti-theft alarm.

Background

The rubber button in the remote control will become worn after a time and is now available as a spare part for remote control with part number 45 50 075, 45 50 083 and 45 50 091.

Remote control with other part numbers must be replaces as the buttons are not replaceable.

Parts required

50 40 274 Rubber button

Procedure



1. Open the battery cover and carefully remove the two batteries.

Important

Be careful not to touch the contact surfaces on the batteries as this may cause interruptions in operation.


2. Place a small screwdriver in the notch on the remote control and carefully pry apart the two halves.


Important

Be careful not to press the screwdriver into the remote control, as this will damage the circuit board.


3. Detach the rubber button from the upper half with a small screwdriver.


4. Fit the new rubber button. Make sure the button symbols are in the correct positions.


Poke down the rubber with a small screwdriver. Check the front of the remote control to make sure it is correctly fitted.

5. Put together the two halves.

Important

Take great care of the circuit board when fitting together the two halves.


6. Put back the batteries and close the cover.


Important

Be careful not to touch the contact surfaces on the batteries as this may cause interruptions in operation.


7. Synchronize the remote control to the car by pressing the left-hand button five times.


Warranty/Time Information

Failed Object: 38 396

Fault/Reason code: 33

Location code: 09

Repair/Action code: 01

Time: 0.1 hours