Basic functions of Theft Alarm900
| Basic functions of Theft Alarm 900 |
| Regulation and control |
The theft alarm has a central electronic control module that controls all the functions of the system.
| Sensing |
The theft alarm has a number of sensors which are connected to the alarm control module via the car's cable assembly. These sense if a break in takes place and send this on to the alarm control module.
| Alarm signalling |
When the alarm is set off, this is made apparent with sound by the alarm horn sounding and/or light by all the direction indicators flashing.
| 3 circuit breaking |
The control module also has a 3 circuit breaking function that is activated when the alarm is set off. This prevents the engine being started by immobilizing the car's starter function, fuel supply and engine control system.
| Operation |
Operation (arming and disarming) of the theft alarm is by remote control.
| Alarm status |
There is an LED in the car to show the status of the alarm. This flashes with different frequencies or is lit continuously depending on the situation.
| Programming/scan tool diagnostics |
The ISAT scam tool is used for programming and scan tool diagnostics on the theft alarm.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
