Control module
| Control module |
The main function of the electronic control module is to check the situation of the sensors when the alarm is armed and to set off the alarm with the horn and/or direction indicators and prevent starting with 3 circuit breaking in case of a break-in.
In order to achieve this, there is a central processing unit in the electronic control module, in which a control program is stored in PROM (Programmable Read Only Memory). As different markets have special requirements for the operation of the theft alarm, the theft alarm can be programmed to adapt it to the particular market. In addition, there are several possibilities when programming to adapt the function to the requirements of the customer.
Programming is carried out using the ISAT scan tool and the information is stored in EEPROM (Electrically Erasable PROM). Earlier programming is erased when data is programmed. Stored programming does not disappear if the voltage is cut.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
