Direction indicators
| Direction indicators |
| Direction indicators |
All the direction indicators on the car are used when the light alarm is set off and also as a confirmation when a button is pressed on the remote control.
It is possible to program whether the direction indicators are included in the alarm and what the flash time should be. The configuration of the light confirmation is also programmable.
The car direction indicators are connected to the control module (pin 12 for right-hand direction indicators and pin 24 for left-hand direction indicators). The outputs are protected against short circuit and if the control module senses a short circuit, they are automatically disconnected from the alarm and only the sound alarm is maintained. The direction indicator outputs are reconnected when the alarm is next armed.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
