LED
| LED |
An LED is mounted in the centre of the dashboard to indicate the status of the anit-theft alarm. It is controlled via the control unit (pin 2) and flashes (at varying frequency) or is on continuously, depending on different conditions. Some normal cases are shown in the table below.
| Self diagnostics |
Each time the alarm is armed, a self diagnostic test is conducted during the delay period (10 sec) while the LED is lit. If a fault is revealed, a diagnostic trouble code is stored in the control module and the LED flashes once every second. Other alarm functions are not affected.
|
Function
|
LED
|
Time
|
Flash frequency
|
|
Arming
|
lit continuously
|
10 sec (delay period)
|
|
|
alarm, armed
|
flashes
|
|
1 flash/2 sec
|
|
Door, tailgate or hood open when arming takes place.
|
flashes
|
10 sec
|
1 flash/sec
|
|
Door, tailgate or hood open during delay period.
|
lit continuously - flashing
|
10 sec
|
1 flash/sec
|
|
Door, tailgate or hood closed during delay period.
|
flashes - lit continuously
|
10 sec
|
|
|
Tailgate closed after delay period.
|
flashes - lit continuously
|
10 sec
|
|
|
Tailgate opened after delay period.
|
flashes
|
|
1 flash/2 sec
|
|
Disconnection of glass breakage sensor (button)
|
flashes
|
10 sec
|
1 flash/sec
|
|
Self-arming, 3 circuit breaking
|
flashes
|
|
double flash/2 sec
|
|
Self-arming, theft alarm
|
flashes
|
|
1 flash/2 sec
|
|
Disarmed alarm
|
lit continuously
|
1 sec
|
|
|
Fault in system
|
flashes
|
during delay period
|
1 flash/sec
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
