Replacing wiring harness in rear door
|
|
Replacing wiring harness in rear door
|
|
2.
|
Remove the cover plate on the lower front edge of the door. Press out the cover plate from inside the door.
|
|
3.
|
Unplug all the connectors in the rear door and pull out the wiring harness.
|
|
4.
|
Remove the rubber grommet at the bottom of the B-pillar.
|
|
5.
|
Detach the 10-pin connector in the B-pillar.
|
|
6.
|
Fit the new wiring harness, checking the markings, connector colour codes and lead codes carefully against the wiring diagrams in Service Manual "3:2 Electrical system, Wiring diagrams".
|
Note
|
|
Secure the wiring harness in a suitable way to prevent rattling!
|
|
Fit the trim in reverse order.
|
|
