SAAB WIS ONLINE

Transmission fluid temperature sensor

Transmission fluid temperature sensor

To remove



1. Unplug the temperature sensor's cable.

2. Remove the two screws securing the cover plate.


Note

Note

Fluid will run out of the transmission.


3. Unscrew the fluid temperature sensor.


Fitting



1. Screw the fluid temperature sensor in place.

Tightening torque: 25 Nm (18.5 lbf ft).

2. Refit the cover plate and tighten the screws.

Tightening torque: 25 Nm (18.5 lbf ft).

3. Plug in the fluid temperature sensor's cable.


Important

Important

Check the level of the fluid after refitting the temperature sensor.