SPORT indicator lamp
Symptom: The lamp does not light up or lights up and stays on constantly.
 
  
 
 
  
  
   
   
    
     Fault symptom
    
   
   
    The lamp does not light up or lights up and stays on constantly.
    
    
    
     Diagnostic procedure
    
    
     1 Check the lamp
    
    
      
    
    
   
   
  
    
  
  
  
   
   
  
  
  
   
    
     
      | - | Connect the Scan tool diagnostics instrument. 
 
 | 
    
   
  
  
   
  
  
   
  
  
  
   Does the lamp work?
  
  
  
   
    Continue with point 3.
    
    
   
  
  
  
  
   
    Change the bulb, see Service Manual 3:5 "Electrical system, main instrument display panel", and continue with point 2.
    
    
   
  
  
  
   2 Check the wiring
  
  
    Check the wiring between pin 24 of the transmission control module and pin 5 (low spec.) or pin 23 (high spec.) of the main instrument display panel for continuity or shorting.
  
  
  
   Check the wiring between pin 24 of the transmission control module and pin 5 (low spec.) or pin 23 (high spec.) of the main instrument display panel for continuity or shorting.
   
   
   
    Is the wiring harness OK?
   
   
   
    
     Continue with point 3.
     
     
    
   
   
   
   
    
     Repair or replace the wiring and continue with point 3.
     
     
    
   
   
   
    3 Final check
   
  
  
   Check the lamp with the diagnostics instrument.
   
   
   
    Does the lamp work?
   
   
   
    
     The remedial action taken was correct.
     
     
    
   
   
   
   
    
     Continue with
     
       .
     
     .