WINTER mode indicator lamp
Symptom: The lamp does not light up or lights up and stays on constantly.
|
|
WINTER mode indicator lamp
|
Fault symptom
The lamp does not light up or lights up and stays on constantly.
Diagnostic procedure
1 Check the lamp
|
-
|
Connect the Scan tool diagnostics instrument.
|
Does the lamp work?
Continue with point 3.
Change the bulb, see Service Manual 3:5 "Electrical system, main instrument display panel", and continue with point 2.
2 Check the wiring
Check the wiring between pin 7 of the transmission control module and pin 6 (low spec.) or pin 42 (high spec.) of the main instrument display panel for continuity or shorting.
Is the wiring harness OK?
Continue with point 3.
Repair or replace the wiring and continue with point 3.
3 Final check
Check the lamp with the diagnostics instrument.
Does the lamp work?
The remedial action taken was correct.
Continue with
.
