SAAB WIS ONLINE

Solenoid, replacement

Solenoid, replacement

To remove


Note

Important

Solenoid ST, which controls system pressure, must not be removed!



1. Remove the valve housing cover, see .

2. Unplug the relevant solenoid's connector.

3. Remove the solenoid's retaining bolt.

4. Prise the solenoid loose, using a screwdriver.


To fit


1. Position the solenoid and tighten the bolt.

Tightening torque: 7 Nm (5 lbf ft).

2. Plug in the solenoid's connector.

3. Fit the valve housing cover, see .