SAAB WIS ONLINE

Transmission fluid temperature sensor

Transmission fluid temperature sensor

To remove



1. Disconnect the temperature sensor's cable.

2. Remove the two bolts securing the cover.


Note

Note

Fluid will run from the gearbox.


3. Unscrew the fluid temperature sensor.


To fit



1. Screw the fluid temperature sensor in place.

Tightening torque: 25 Nm (18.5 lbf ft).

2. Refit the cover and tighten the bolts.

Tightening torque: 25 Nm (18.5 lbf ft).

3. Reconnect the fluid temperature sensor's cable.


Note

Important

Check the level of the fluid after refitting the temperature sensor.