WINTER control lamp
Symptom: The lamp does not go on or is on constantly.
Fault symptoms
The lamp does not go on or is on constantly.
Diagnostic procedure
1 Check the lamp
|
-
|
Connect the diagnostic tool.
|
Does the lamp work?
Continue with step 3.
Change the bulb, see Service Manual 3:5 "Electrical system, main instrument unit" and continue with step 2.
2 Check the wiring
Check the wiring between pin 7 of the transmission control module and pin 6 (low spec.) or pin 42 (high spec.) of the main instrument display panel for continuity or shorting.
Is the wiring harness OK?
Continue with step 3.
Repair or replace the wiring and continue with point 3.
3 Final check
Check the lamp with the diagnostic tool.
Does the lamp work?
The remedial action taken was correct.
Continue with
.
