Control module power supply
| Control module power supply |
Battery voltage (+30 circuit)
The transmission control module is continuously supplied with battery voltage (+30 circuit) on pin 18. The control module uses this voltage as a back-up for the memory. Current consumption on back-up is less than 1 mA.
Battery voltage (+15 circuit)
When the ignition switch is in the Drive position, the transmission control module is supplied with current (+15 circuit) on pin 17. This current is necessary in order to activate the control module.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
