Checking manual shifting

/ 900 / 1995 / 4. Transmission / Gear selector lever (aut) OBDII / Fault diagnosis of fault symptoms / Checking manual shifting

1.	Unplug the transmission control module connector.

2.	Check to make sure that the car does not move when the selector lever is in position N.

3.	Check to make sure that the car does not move when the selector lever is in position N.

4.	Check to make sure that the P interlock engages properly in position P. Selector lever position P R N D 3 2 1 Gear P R N 4 4 3 3

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.