Adjustment/replacement
📄 Gearbox (mechanical clutch), removal
📄 Gearbox (mechanical clutch), fitting
📄 Inspection and adjustment of gear positions
📄 Bushes in the gear lever link.
📄 Gear lever bearing (spherical socket and spherical socket ring)
📄 Inspection of the functioning of the gear lever's reverse gear catch.
📄 Ignition lock with ignition lock switch
📄 Change of bearing on output shaft
📄 5th synchromesh assembly, input shaft
📄 Change of bearing race on input shaft
📄 Replacing/removing sealing ring for selector rod
📄 Replacing/removing bearing bush
📄 Differential bearing race in clutch case.
📄 Replacing sealing ring on right seal holder
📄 Replacing/removing the output shaft bearing race.
📄 Replacing/removing input shaft bearing race.
📄 Removal of bushes for selector shafts in gear case
📄 Replacing O-ring and sealing ring in left seal holder
📄 Final drive gear, differential unit
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
