The shift-lock's electro-magnet
|
|
The shift-lock's electro-magnet
|
|
1.
|
Remove the floor and centre
consoles, see Service Manual 8:2,
Fixtures and fittings.
|
|
2.
|
Release the wiring by cutting the cable tie.
|
|
3.
|
Remove the electro-magnet (2 screws).
|
Fitting is carried out in the reverse order, but the electro-magnet
should be adjusted before the floor and centre consoles are
refitted.
|
Adjusting the electro-magnet
|
|
•
|
Release the electro-
magnet's screws.
|
|
•
|
When the hook is in its bottom position, the distance to the pin
should be 1-2 mm.
|
