"MEMORIZING" command menu

Note
The "CALIBRATION" menu has a submenu consisting of two commands:
-GEAR POSITION
-ENGAGEMENT POSITION


GEAR POSITION	On replacement of the gear selector position sensor, the control module must be recalibrated for the new sensor. Memorizing (calibration) of the gear position should be carried out with the engine running. The gear lever is to be moved through the sequence 1, 2, 3, 4, 5, R, N. Note that it is important to release the gear lever in each gear position and then press ON/ENTER on the Scan tool diagnostics instrument. If memorization is accepted, the Scan tool diagnostics instrument will display a response: CALIBRATION OK! If memorization is not accepted, the Scan tool diagnostics instrument will display a different response: CALIBRATION FAILED. In production, individual calibration of every car is carried out before it leaves the works.
ENGAGE 1ST GEAR THEN PRESS ON/ENTER
ENGAGE 2ND GEAR THEN PRESS ON/ENTER
ENGAGE 3RD GEAR THEN PRESS ON/ENTER
ENGAGE 4TH GEAR THEN PRESS ON/ENTER
ENGAGE 5TH GEAR THEN PRESS ON/ENTER
ENGAGE REVERSE GEAR THEN PRESS ON/ENTER
ENGAGE NEUTRAL THEN PRESS ON/ENTER
ENGAGEMENT POSITION	Not implemented, see for manual adjustment of the slip point.