+50
+50 |
When the ignition switch is turned to the Start position, current (+50 circuit) is sent (possibly via the anti-theft alarm) to pin 26 of the Sensonic control module.
Provided that the clutch has opened, the Sensonic control module then sends the +50 supply to the starting relay from pin 5.
The conditions determining whether the clutch will open (disengage) are that:
• |
The gear lever is in neutral.
|
• |
The gear lever is in reverse and the brake pedal depressed.
|
• |
There is no hydraulic system or communication fault between the control module and clutch actuator unit.
|