Adjusting cable equalisation (1-cable)
| Adjusting cable equalisation (1-cable) |
| 1. |
Set the handbrake at notch 2.
|
|
| 2. |
Lift the car.
|
|
| 3. |
Tighten the adjusting nut on the link rod (cable equalisation) until the brake starts
to operate.
|
|
| 4. |
Lower the car slightly.
|
|
| 5. |
Release the handbrake and tighten once again. At the 6th notch the wheels
should be locked.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
