SAAB WIS ONLINE

Belt pulley (4 cyl.)

Belt pulley (4 cyl.)

To remove



1. Remove the air cleaner.

2. Relieve belt tensioner pressure and remove the belt from the pulley.

3. Use puller 89 96 423 and remove the belt pulley.


To fit



1. Fit the new pulley on the shaft.

2. Use fitting tool 89 98 415 and fit the new belt pulley.

3. The pulley should be fitted so that its hub comes 0.5 mm outside the end of the pump shaft.

Important

Do not press the pulley in too far.


4. Fit the belt on the pulley and remove the strain relief.

5. Fit the air cleaner.