SAAB WIS ONLINE

Bearing replacment (in situ)

Bearing replacment (in situ)

To dismantle



1. Remove the steering wheel.

2. Remove the upper and lower sections of the steering wheel cowling.

3. Remove the coil spring unit and the two retaining screws.

4. Remove the locking ring.

5. Remove the bearing housing bolt and remove the bearing housing.


To assemble



1. Fit the new bearing housing in position.

2. Fit a new locking ring.

3. Fit the coil spring unit and the two retaining screws.

4. Fit the upper and lower sections of the steering wheel cowling.

5. Fit the steering wheel.