Steering columnassembly
| Steering column assembly |
1 Steering column assembly
2 Steering column
3 Intermediate shaft
4 Universal joint
5 Power-assisted steering system
The steering column assembly is bolted to the bulkhead. The steering column shaft is mounted in two needle bearings suspended in rubber mountings in the steering column assembly. A jointed intermediate shaft connects the steering column to the power- assisted steering gear.
For reasons of safety the steering column assembly incorporates a collapsible steel cage, a telescopic steering column shaft and an intermediateshaft with a deformation zone designed to crumple progressively in the event of a head-on collision. In addition, the joint configuration is such that the shaft will be directed away from the driver in a collision.
Adjustment of the position of the steering wheel spokes is effected by adjusting the toe-in on both sides of the car.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
