Rear anti-roll bar, inner
|
|
Rear anti-roll bar, inner
|
|
1.
|
Raise the car and remove one
of the rear wheels.
|
|
2.
|
Remove the bolts (at the ends) securing the inner anti-roll bar |I5.
|
|
3.
|
Withdraw the anti-roll bar from the rear axle |I6.
|
|
1.
|
Slide the new anti-roll bar into
the rear axle (coat the anti-roll
bar thinly with grease to facilitate assembly).
|
|
2.
|
Fit all retaining bolts and tighten them.
Tightening torque: 60 Nm +(60°-75°) (44.3 lbf ft
+60°-75°)
|
|
3.
|
Check the position of the rubber block |I7.
|
|
4.
|
Fit the wheel on the car.
|
