Knee member, driver
Knee member, driver |
To remove |
1. |
Dismantle the data link connector located on the lower part of the dashboard on the driver's side (A).
|
2. |
Remove the lower panel retaining screws and expanding rivets on the front. The expanding rivets are removed by pressing in the centre part of the rivet (B)
|
3. |
Remove the screws securing the knee member and lift it out, 2 screws (C).
|
To fit |
1. |
Fit the knee member in place and tighten the screws, 2 pcs (C).
|
2. |
Refit the lower panel under the steering wheel (B).
|
3. |
Refit the data link connector (A).
|