Front seat belts, 5D
Front seat belts, 5D |
1. |
Remove the B-pillar trim, see
page 851-8.
|
2. |
Move the red plastic lever forwards to engage the belt pretensioner safety catch.
|
3. |
Drill out the pop rivet through the clamp round the belt pretensioner tube and
remove the clamp.
|
4. |
Remove the belt guide.
|
5. |
Remove the screw at the top of the belt adjuster plate and lift the plate out at the
bottom.
|
6. |
Remove the belt reel retaining screws.
|
7. |
Extract the belt reel and pretensioner.
|
To fit |
Fit in reverse order.
Tightening torque:
Belt reel retaining screws: 45 Nm (33 lbf ft)
Adjuster plate retaining screw: 24 Nm (18lbf ft)