SAAB WIS ONLINE

Measuring pressure with the Robinair 10324 Smart Cart

Measuring pressure with the Robinair 10324 Smart Cart



1. Check that the cock on the blue low-pressure hose and the cock on the red high-pressure hose on the pressure gauge stand are both closed.

2. Using a snap-on coupling, connect the blue low-pressure hose to the low-pressure side of the AC system.

3. Using a snap-on coupling, connect the red high-pressure hose to the high-pressure side of the AC system.

4. Open the valves on both snap-on couplings by screwing in the knobs.

5. Start the engine.

At an engine speed of 1500 - 2000 rpm and an ambient temperature of 20 ° C, it should be possible to note the following on the pressure gauges when the compressor is operating:

Low-pressure side: 1-3 bar

High-pressure side: 12-16.5 bar