SAAB WIS ONLINE

Control module

Control module

To remove


1. Remove the sill protection in the luggage compartment.


2. Remove the clips in the lower part of the luggage compartment trim covering the control module on the left-hand side.

3. Detach and fold away the luggage compartment seal on the left-hand side.

4. Unplug the connectors to the luggage compartment light.

5. Unplug the three control module connections.


6. Remove the nuts securing the control module and lift it away.


To fit



1. Put the control module in place and tighten the nuts.

2. Plug in the control module cables.

3. Plug in the luggage compartment light connectors.


4. Put back the luggage compartment trim and seal.

5. Press in place the clips securing the luggage compartment trim.

6. Put back the sill protection.

7. Connect the diagnostic tool, clear any diagnostic trouble codes and then program the control module. See .