Fifth bow
Fifth bow |
1. |
Remove the fifth bow seal.
|
2. |
Remove the screws securing the rear of the headlining.
|
3. |
Detach the outer roof from the fifth bow.
|
4. |
Drill away the blind rivets securing the cloth bands to the fifth bow.
|
5. |
Remove the screws securing the fifth bow and lift it away.
|
6. |
Transfer the latch fittings and rear window guides to the new bow if one is being fitted.
|
To fit |
1. |
Transfer the latch fittings and rear window guides to the new bow if one is being fitted.
|
2. |
Put the fifth bow in place and tighten the screws.
|
3. |
Put the cloth bands in place and blind rivet them to the fifth bow.
|
4. |
Glue the roof cloth to the fifth bow. Use Super Weatherstrip Adhesive.
|
5. |
Screw on the rear of the headlining.
|
6. |
Put the fifth bow seal in place. Use soap water on the seal to make it easier to fit.
|
7. |
Connect the diagnostic tool, clear any diagnostic trouble codes and then program the control module. See
.
|