SAAB WIS ONLINE

Gluing the base of the rear view mirror

Gluing the base of the rear view mirror


1. Mark out the position at the top of the windscreen, in the middle of the blackened surface.

2. Mark the position for the rear view mirror base 16 mm from the lower line.


3. Glue on the base of the rear view mirror with glass adhesive, part no. (45) 30 06 830.

Important

Protect the windscreen under the base of the rear view mirror with a piece of tape in case the screwdriver should slip.


4. Press down the mirror on the base. Use a screwdriver to help the last stretch.