Linkage between front rail and middle rail
| Linkage between front rail and middle rail |
| To remove |
| 1. |
Remove the two screws securing the threaded rod to the middle rail.
|
|
| 2. |
Remove the three linkage retaining screws and spare the washers.
|
|
| To fit |
| 1. |
Apply threadlocker to the screws. Put the front mountings in place with the washers and tighten the screws.
|
|
| 2. |
Apply threadlocker and screw on the rear mounting.
|
|
| 3. |
Apply threadlocker and fit the threaded rod to the middle rail.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
