Microswitch on emergency closing lever
Microswitch on emergency closing lever |
1. |
Fold forward the rear seat backrest.
|
2. |
Fold away the trim covering the emergency closing lever.
|
3. |
Remove the screws securing the microswitch.
|
4. |
Unplug the connector and remove the microswitch.
|
To fit |
1. |
Plug in the connector.
|
2. |
Put the microswitch in place and tighten the screws.
|
3. |
Put the trim back in place.
|
4. |
Raise the backrest.
|
5. |
Connect the diagnostic tool and clear any diagnostic trouble codes.
|