20 Locating studs in first bow do not reach locating holes in windscreen member.
|
20 Locating studs in first bow do not reach locating holes in windscreen member.
|
A.
|
Are the soft top stops adjusted incorrectly?
Adjust the soft top stops.
|
B.
|
Longitudinal adjustment.
See
|
C.
|
Does the first bow need to be moved forwards?
|
v
|
C.1.
|
Partly lower the soft top.
|
v
|
C.2.
|
Remove the front side rail seals on both sides.
|
v
|
C.3.
|
Remove the three screws and blind rivet (one side at a time).
|
v
|
C.4.
|
Lengthen the holes in the side rail 3-4 mm.
|
v
|
C.5.
|
Apply threadlocker and tighten the screws. Fit a new blind rivet.
|
v
|
C.6.
|
Repeat on the other side.
|
v
|
C.7.
|
Adjust the first bow so that the locating studs enter the holes correctly.
|