SAAB WIS ONLINE

Front spoiler

Front spoiler

To remove


Note

The spoiler skirt and spoiler are divided into right-hand and left-hand sections.



1. Raise the car.

2. Remove the right-hand and left-hand spoiler skirts by undoing the 13 retaining bolts and collecting them.

3. Detach the front of the wing liners from the rear of the bumper.


4. Bend aside the wing liners to gain access to the outer retaining bolts for the spoiler sections, one on each side. Remove the bolts.


5. Remove the middle retaining bolt, which secures both the right-hand and left-hand spoiler sections.

6. Remove the right-hand and left-hand spoiler sections.

Note

The spoiler sections are secured to the bumper by snap fasteners, four on each section. Undo them and pull the spoiler sections forwards away from the fasteners.



To fit



1. Offer up the spoiler sections and make sure that they snap into place.

2. Bend aside the wing liner to gain access to the holes for the outer retaining bolts.

3. Fit the outer retaining bolts.

4. Fit the wing liners to the bumpers.

5. Fit the middle retaining bolt.

6. Position the spoiler skirts and fit the 13 retaining bolts.


7. Lower the car to the floor.